I like a superb IKEA hack. After I wanted a closet/wardrobe in a room in our residence that had no closet (it was a porch that they transformed right into a room), I considered making an attempt to customized construct some shelving.
However, then I remembered that ordering an affordable Pax wardrobe and constructing it into the wall could be the quickest, best, and greatest wanting answer to my closet storage downside.
When you’re asking, “How do you make IKEA Pax wardrobes look inbuilt?” it’s really fairly easy and I used to be stunned how briskly the method went. I’ll present you what I did!
Trying to set up your closet area? Take a look at these posts:
Provides:
–IKEA Pax wardrobes (I did this double set and added plain doorways)
–2 1/2″ or 3″ development screws
-drill
–miter noticed or hand noticed with a miter field
-2x4s or 2x2s for base
–ending nail gun or small end nails, a hammer, and a nail setter
-baseboard to match your present baseboard
–wooden filler and caulk
-paint in your present baseboard colour and/or IKEA Pax Wardrobe colour
The 1st step: Take away the baseboard. You’ll need to first take away the baseboard on the wall that you’re inserting your shelving in order that it could possibly sit completely flush in opposition to the wall. Simply use a field cutter/razor to chop the bead of caulk between the highest of the baseboard and the wall to disconnect that connection level.
Then, use a crowbar to softly pry the baseboard off the wall (pull it a little bit bit each foot or so to try to hold all of it coming off at about the identical tempo to keep away from breaking it).
If you wish to solely take away the quantity wanted somewhat than the entire baseboard, you should utilize a multi-tool like this and mark how a lot board you need eliminated primarily based in your closet width and size measurements.
Then lower a line down the board so you’ll be able to merely pull off the piece you need eliminated (you’ll be able to see I did that on the again proper nook of my photograph).
Step two: Construct your easy rectangle platform. You realize what a rectangle appears like? Good. All you must do now’s construct a base with both 2x4s or 2x2s that’s the identical dimension as your cupboard dimensions.
So let’s say for simplicity’s sake your whole closet measures 24″ huge and 80″ lengthy, you’d construct a base 24″ huge and 80″ lengthy so it matches completely underneath your closet.
I used a miter noticed for this, however you can too use a hand noticed with a miter field to chop your boards to the appropriate lengths.
You’ll see I additionally lower some center assist boards which might be the identical size as my finish items so the center of the closet had one thing to relaxation on as properly. Simply screw your boards in place from the skin edges and your platform is able to go.
Non-compulsory word: As you’ll be able to see, the appropriate aspect of my cupboard is correct in opposition to the wall, so I did add a 3″ spacer trim board to that aspect to make it simpler to open that door with out feeling tremendous tight (I’ll present you ways).
You gained’t want to do this if you’re in a free-standing space, however you could contemplate it if one aspect is in opposition to the wall like mine and also you need to transfer it out a bit.
It’s one further step, and that you must add that into your whole width measurements, however it helped so much since I had a wall and a window in that nook.
Step three: Connect platform to wall. Use some all-purpose screws to connect the again fringe of your base to the wall each 12″ or so. When you had flooring you didn’t care about, you can additionally drill down into the entrance edge to safe that to the ground.
However there’s actually sufficient weight on the platform as soon as full to not likely want to do this step.
Step 4: Add your wardrobes on prime (one by one). Place your closet sections one by one on the platform, ensuring it’s cosy in opposition to the wall.
The IKEA directions present you learn how to join the sections to one another after which learn how to join them to the wall, so simply observe their directions to put in.
Step 5: Add your trim. Now that your models are sitting on the platform and related to the wall, you’ll be able to go forward and add your baseboard again on. For greatest outcomes, use a miter noticed to chop your baseboard to suit all the way in which as much as after which round your closet (I lower a forty five° angle on the corners for a clear look).
Or you should utilize your hand noticed and a miter field should you don’t have an influence noticed. I lower the wall items first to suit after which measured for the items across the closet.
Connect with both a ending nail gun (I’ve this battery one and I find it irresistible) or small end nails and a hammer and use a nail setter to ensure the top of the nails go in previous the face of the wooden.
I additionally added a small piece of cupboard trim to the vertical aspect hole between the wall and the cupboard (it was really leftover from my kitchen renovation), however you’ll be able to order one thing comparable from the cupboard division of a house enchancment retailer.
Or simply browse their trim aisle and see should you like something over there. I simply lower it to the peak of the cupboard and connected it with a end nailer.
Step six: Caulk/paint your trim and also you’re finished! Fill any nail holes with a small quantity of wooden filler (simply wipe with a humid material to easy, simpler than sanding) and caulk between the baseboard and the wall or closet to make them look seamless.
When the filler and caulk is dry, paint your baseboards to match both the cupboard or the baseboards in the remainder of the room for those in opposition to the wall solely, and your new closet system is able to use!
I used Melting Icicles by Behr to match IKEA Pax white and it’s an ideal colour match if you’re making an attempt to match the inventory wardrobe.
Non-compulsory aspect trim/spacer step: When you do resolve so as to add some size to at least one aspect (or each) to get a wardrobe door farther from a wall (or to middle the entire thing right into a recessed space however you might have a niche on either side), add your closets to the platform first.
As soon as they’re connected, scribe the curves of the wall onto a board. Partitions are by no means completely straight, or in my case, even a little bit straight, so that you need to hint the precise curve of the wall onto the board.
When you haven’t scribed an uneven wall or ground onto a board, it is a good video that reveals you learn how to scribe normally and this one reveals learn how to do it when filling in a cupboard hole like I did. I lower my board to the appropriate peak first after which scribed the curves and used an affordable jig noticed to chop the strains.
Then, I gently tapped my board into the area with a hammer/mallet (being actually cautious to not push it again too far in order that it lined up flush with the wardrobe entrance) and connected the spacer to the wardrobe with a end nailer from contained in the wardrobe the place it’s barely noticeable in any respect.
Caulk and paint the spacer and the realm will completely disappear into the built-in.
How nice does that look?! I did additionally add some customized trim to the doorways to make them really feel extra Parisian and particular.
I’ll present you ways to do this in one other submit, however it’s fairly just like how I added DIY Arched Door Trim (with Versatile Molding!) to the doorways in my home.
When you’ve at all times needed some built-in closet or wardrobe storage, it is a nice strategy to do it your self and you’ll customise it to the scale that you just want by shopping for kind of Pax wardrobe models.
This solved a giant downside for me in an inexpensive means and I like the way in which that it appears within the room. Hope this helps should you’re considering of doing the identical! xo. Laura
If you wish to see extra rooms in my residence, take a look at my residence excursions right here!
Straightforward Hack to Construct-In an IKEA Pax Wardrobe
Straightforward strategy to make an IKEA Pax wardrobe look constructed into the wall
-
The 1st step: Take away the baseboard. You’ll need to first take away the baseboard on the wall that you’re inserting your shelving in order that it could possibly sit completely flush in opposition to the wall. Simply use a field cutter/razor to chop the bead of caulk between the highest of the baseboard and the wall to disconnect that connection level and use a crowbar to softly pry the baseboard off the wall (pull it a little bit bit each foot or so to try to hold all of it coming off at about the identical tempo to keep away from breaking it).
-
If you wish to solely take away the quantity wanted somewhat than the entire baseboard, you should utilize a multi-tool like this and mark how a lot board you need eliminated primarily based in your closet width and size measurements and the lower a line down the board so you’ll be able to merely pull off the piece you need eliminated (you’ll be able to see I did that on the again proper nook of my photograph).
-
Step two: Construct your easy rectangle platform. You realize what a rectangle appears like? Good. All you must do now’s construct a base with both 2x4s or 2x2s that’s the identical dimension as your cupboard dimensions. So let’s say for simplicity’s sake your whole closet measures 24″ huge and 80″ lengthy, you’d construct a base 24″ huge and 80″ lengthy so it matches completely underneath your closet. I used a miter noticed for this, however you can too use a hand noticed with a miter field to chop your boards to the appropriate lengths.You’ll see I additionally lower some center assist boards which might be the identical size as my finish items so the center of the closet had one thing to relaxation on as properly. Simply screw your boards in place from the skin edges and your platform is able to go.
-
Step three: Connect platform to wall. Use some all-purpose screws to connect the again fringe of your base to the wall each 12″ or so. When you had flooring you didn’t care about, you can additionally drill down into the entrance edge to safe that to the ground as properly, however there’s actually sufficient weight on the platform as soon as full to not likely want to do this step.
-
Step 4: Add your wardrobes on prime (one by one). Place your closet sections one by one on the platform ensuring it’s cosy in opposition to the wall. The IKEA directions present you learn how to join the sections to one another after which learn how to join them to the wall, so simply observe their directions to put in.
-
Step 5: Add your trim. Now that your models are sitting on the platform and related to the wall, you’ll be able to go forward and add your baseboard again on. For greatest outcomes, use a miter noticed to chop your baseboard to suit all the way in which as much as after which round your closet (I lower a forty five° angle on the corners for a clear look) or you should utilize your hand noticed and a miter field should you don’t have an influence noticed. I lower the wall items first to suit after which measured for the items across the closet. Connect with both a ending nail gun (I’ve this battery one and I find it irresistible) or small end nails and a hammer and use a nail-setter to ensure the top of the nails goes in previous the face of the wooden.I additionally added a small piece of cupboard trim to the vertical aspect hole between the wall and the cupboard (it was really leftover from my kitchen renovation however you’ll be able to order one thing comparable from the cupboard division of a house enchancment retailer or simply browse their trim aisle and see should you like something over there). I simply lower it to the peak of the cupboard and connected it with a end nailer.
-
Step six: Caulk/paint your trim and also you’re finished! Fill any nail holes with a small quantity of wooden filler (simply wipe with a humid material to easy, simpler than sanding) and caulk between the baseboard and the wall or closet to make them look seamless. When the filler and caulk is dry, paint your baseboards to match both the cupboard or the baseboards in the remainder of the room for those in opposition to the wall solely, and your new closet system is able to use! I exploit Melting Icicles by Behr to match IKEA Pax white and it’s an ideal colour match if you’re making an attempt to match the inventory wardrobe.
-
Non-compulsory aspect trim/spacer step: When you do resolve so as to add some size to at least one aspect (or each) to get a wardrobe door farther from a wall (or to middle the entire thing right into a recessed space however you might have a niche on either side), add your closets to the platform first and as soon as they’re connected, scribe the curves of the wall onto a board. Partitions are by no means completely straight, or in my case, even a little bit straight, so that you need to hint the precise curve of the wall onto the board.When you haven’t scribed an uneven wall or ground onto a board, it is a good video that reveals you learn how to scribe normally and this one reveals learn how to do it when filling in a cupboard hole like I did. I lower my board to the appropriate peak first after which scribed the curves and used an affordable jig noticed to chop the strains. Then I gently tapped my board into the area with a hammer/mallet (being actually cautious to not push it again too far in order that it lined up flush with the wardrobe entrance) and connected the spacer to the wardrobe with a end nailer from contained in the wardrobe the place it’s barely noticeable in any respect. Caulk and paint the spacer and the realm will completely disappear into the built-in.
Non-compulsory word: As you’ll be able to see, the appropriate aspect of my cupboard is correct in opposition to the wall, so I did add a 3″ spacer trim board to that aspect to make it simpler to open that door with out feeling tremendous tight (I’ll present you ways). You gained’t want to do this if you’re in a free-standing space, however you could contemplate it if one aspect is in opposition to the wall like mine and also you need to transfer it out a bit. It’s one further step, and that you must add that into your whole width measurements, however it helped so much since I had a wall and a window in that nook.